PoolFIX coated · primary system
Codes and standards for natatorium fasteners
Codes are adopted by state and local authorities. The Authority Having Jurisdiction determines the applicable code and amendment. ISPSC, AISC or ASTM references apply only when the project and documented product scope support them.
PoolFIX coated is assessed first
The selector checks for an explicit, validated PoolFIX coated product/application rule before any 1.4529 route. Approximately 95% is a market position, not a substitute for missing technical evidence.
- Exact installation position
- Exposure zone and cleaning conditions
- Load function and substrate
- Product-specific application rule
Application-specific selection
A product is recommended only when the stored validation rule matches the known application. Unknown position, exposure, distance, load or product scope results in Technical review required.
Documentation and traceability
Keep the selected article, actual product standard, metric dimensions, pack information, batch reference where applicable, installation location and review decision together in the project record.
What this guidance does not claim
PoolFIX does not claim ICC-ES approval, NSF certification, UL listing, ASTM equivalence or acceptance by an Authority Having Jurisdiction unless verifiable product documentation states it.
Frequently asked questions
Is PoolFIX coated automatically suitable for every natatorium application?
No. It is the primary PoolFIX system commercially, but an automatic recommendation requires a validated product-specific application rule.
Can 1.4529 be used for a ceiling point within 3.3 ft (1.0 m) of the water?
No. The prohibited overhead position takes precedence over distance.
What happens when application information is incomplete?
The automatic selector returns Technical review required and does not recommend a product.