PoolFIX · International English
Knowledge base for swimming-pool fasteners
Coated-first material selection, restricted 1.4529 limits, stress corrosion cracking, inspection, documentation and project-specific technical review.
Technical guidance
PoolFIX coated · primary system
PoolFIX coated fasteners for swimming pools
PoolFIX coated is the primary PoolFIX system for approximately 95% of suitable swimming-pool applications. That commercial position never replaces product-specific v
Read guidancePoolFIX coated · primary system
Swimming-pool fasteners selected by application
A swimming-pool is not one exposure zone. Each fastener must be selected for its actual location, substrate, load and maintenance regime. PoolFIX coated is assessed
Read guidancePoolFIX coated · primary system
Fasteners for indoor swimming-pool environments
Warm humidity, chlorides, condensation and inaccessible details make pool facility applications different from ordinary indoor construction. Selection starts with a
Read guidancePoolFIX coated · primary system
Fasteners for pool facilities
Operators, designers and contractors need one traceable route from application data to product selection, installation records and inspection. PoolFIX keeps that cha
Read guidancePoolFIX coated · primary system
Stress corrosion cracking in swimming pools
Stress corrosion cracking can develop when a susceptible material, chloride exposure and tensile stress act together. Surface appearance alone cannot establish that
Read guidancePoolFIX coated · primary system
Stainless steel 304 and 316 risks in pools
A2/304 and A4/316 are not automatically suitable in a swimming-pool atmosphere. Exposure, tensile stress, temperature, geometry, cleaning and location all affect sus
Read guidancePoolFIX coated · primary system
Material selection for swimming-pool fasteners
PoolFIX coated is always assessed first against a validated application rule. 1.4529 HCR / Alloy 926 is never offered as an equivalent upgrade; it is a restricted ex
Read guidanceRestricted exception · Binding PoolFIX Application Guideline
1.4529 HCR application limits
1.4529 HCR / Alloy 926 is not a universal swimming-pool solution. Under the binding PoolFIX Application Guideline it may only be considered for pre-approved ground-l
Read guidanceNo automatic material selection
Overhead pool fasteners require technical review
1.4529 must never be specified or used for roofs, ceilings, overhead applications, suspended systems, suspended services or hanging equipment — even when the point i
Read guidancePoolFIX coated · primary system
Pool fastener inspection and traceability
Inspection starts with an inventory: product reference, batch where available, location, load function, substrate, exposure and installation record. A visual check a
Read guidancePoolFIX coated · primary system
Specification language for pool fasteners
A usable specification states the actual product, metric dimensions, applicable product standard, substrate, location, exposure, load assumptions, installation metho
Read guidancePoolFIX coated · primary system
Certificates and batch traceability
PoolFIX supplies product documentation and batch traceability where applicable. A delivery certificate records supplied references; it does not replace structural de
Read guidancePoolFIX coated · primary system
Technical guidance for pool fasteners
Applicable law, standards and contract requirements depend on the project country. Dutch references such as NEN 9200 may be informative but are not automatically loc
Read guidancePoolFIX coated · primary system
Technical support for PoolFIX applications
When the application matrix cannot establish a validated result, PoolFIX returns Technical review required. The review needs the exact position, exposure, distance t
Read guidanceProduct categories
PoolFIX coated · primary
PoolFIX coated screws
Screws with actual product standard, metric dimensions and documented product reference.
PoolFIX coated · primary
PoolFIX coated bolts
Bolts for validated PoolFIX coated applications, with compatible nuts and washers selected as a system.
PoolFIX coated · primary
PoolFIX coated nuts
Coated nuts for compatible PoolFIX bolted connections.
PoolFIX coated · primary
PoolFIX coated washers
Coated washers for load distribution within a validated fixing assembly.
PoolFIX coated · primary
PoolFIX coated threaded rod
Metric threaded rod for product-specific PoolFIX coated applications.
PoolFIX coated · primary
PoolFIX coated concrete fasteners
Concrete fasteners requiring validation of substrate, edge distance, embedment and installation method.
Restricted exception
Restricted 1.4529 HCR / Alloy 926 fasteners
Only for pre-approved ground-level applications within 1.0 metre / 3.3 ft of the water; never overhead or suspended.