PoolFIX · United Kingdom
Knowledge base for swimming-pool fixings
Coated-first material selection, restricted 1.4529 limits, stress corrosion cracking, inspection, documentation and project-specific technical review.
Technical guidance
PoolFIX coated · primary system
PoolFIX coated swimming-pool fixings
PoolFIX coated is the preferred PoolFIX system for approximately 95% of suitable swimming-pool applications. That commercial position never replaces product-specific
Read guidancePoolFIX coated · primary system
Swimming-pool fixings selected by location
A swimming-pool is not one exposure zone. Each fixing must be selected for its actual location, substrate, load and maintenance regime. PoolFIX coated is assessed fi
Read guidancePoolFIX coated · primary system
Fixings for indoor swimming pools
Warm humidity, chlorides, condensation and inaccessible details make leisure centre applications different from ordinary indoor construction. Selection starts with a
Read guidancePoolFIX coated · primary system
Fixings for pool halls and leisure centres
Operators, designers and contractors need one traceable route from application data to product selection, installation records and inspection. PoolFIX keeps that cha
Read guidancePoolFIX coated · primary system
Stress corrosion cracking in pool halls
Stress corrosion cracking can develop when a susceptible material, chloride exposure and tensile stress act together. Surface appearance alone cannot establish that
Read guidancePoolFIX coated · primary system
Stainless steel 304 and 316 risks in pool halls
A2/304 and A4/316 are not automatically suitable in a swimming-pool atmosphere. Exposure, tensile stress, temperature, geometry, cleaning and location all affect sus
Read guidancePoolFIX coated · primary system
Material selection for swimming-pool fixings
PoolFIX coated is always assessed first against a validated application rule. 1.4529 HCR / Alloy 926 is never offered as an equivalent upgrade; it is a restricted ex
Read guidanceRestricted exception · Binding PoolFIX Application Guideline
1.4529 HCR application limits
1.4529 HCR / Alloy 926 is not a universal swimming-pool solution. Under the binding PoolFIX Application Guideline it may only be considered for pre-approved ground-l
Read guidanceNo automatic material selection
Overhead pool fixings require technical review
1.4529 must never be specified or used for roofs, ceilings, overhead applications, suspended systems, suspended services or hanging equipment — even when the point i
Read guidancePoolFIX coated · primary system
Swimming-pool fixing inspection
Inspection starts with an inventory: product reference, batch where available, location, load function, substrate, exposure and installation record. A visual check a
Read guidancePoolFIX coated · primary system
Specification text for swimming-pool fixings
A usable specification states the actual product, metric dimensions, applicable product standard, substrate, location, exposure, load assumptions, installation metho
Read guidancePoolFIX coated · primary system
Product documentation and batch traceability
PoolFIX supplies product documentation and batch traceability where applicable. A delivery certificate records supplied references; it does not replace structural de
Read guidancePoolFIX coated · primary system
Standards and guidance for pool fixings
UK project requirements must be established by the responsible designer. HSE guidance, HSG179, applicable Building Regulations, Approved Document A, BS EN 1993-1-4 a
Read guidancePoolFIX coated · primary system
Technical support for PoolFIX fixing applications
When the application matrix cannot establish a validated result, PoolFIX returns Technical review required. The review needs the exact position, exposure, distance t
Read guidanceProduct categories
PoolFIX coated · primary
PoolFIX coated screws
Screws with actual product standard, metric dimensions and documented product reference.
PoolFIX coated · primary
PoolFIX coated bolts
Bolts for validated PoolFIX coated applications, with compatible nuts and washers selected as a system.
PoolFIX coated · primary
PoolFIX coated nuts
Coated nuts for compatible PoolFIX bolted connections.
PoolFIX coated · primary
PoolFIX coated washers
Coated washers for load distribution within a validated fixing assembly.
PoolFIX coated · primary
PoolFIX coated threaded rod
Metric threaded rod for product-specific PoolFIX coated applications.
PoolFIX coated · primary
PoolFIX coated concrete fasteners
Concrete fasteners requiring validation of substrate, edge distance, embedment and installation method.
Restricted exception
Restricted 1.4529 HCR / Alloy 926 fasteners
Only for pre-approved ground-level applications within 1.0 metre / 3.3 ft of the water; never overhead or suspended.