PoolFIX
PoolFIX coated fixingsLogin
  1. Home
  2. English Seo/HcrLimits

Restricted exception · Binding PoolFIX Application Guideline

1.4529 HCR application limits

1.4529 HCR / Alloy 926 is not a universal swimming-pool solution. Under the binding PoolFIX Application Guideline it may only be considered for pre-approved ground-level applications within 1.0 metre of the water.

Binding PoolFIX Application Guideline

1.4529 / Alloy 926 is never permitted for roofs, ceilings, overhead or suspended applications. A pre-approved ground-level exception must remain within 1.0 metre of the water.

PoolFIX coated is assessed first

The selector checks for an explicit, validated PoolFIX coated product/application rule before any 1.4529 route. Approximately 95% is a market position, not a substitute for missing technical evidence.

  • Exact installation position
  • Exposure zone and cleaning conditions
  • Load function and substrate
  • Product-specific application rule

Binding PoolFIX Application Guideline

1.4529 is limited to pre-approved ground-level applications within 1.0 metre of the water. Roofs, ceilings, overhead and suspended applications are excluded before distance is considered.

Documentation and traceability

Keep the selected article, actual product standard, metric dimensions, pack information, batch reference where applicable, installation location and review decision together in the project record.

What this guidance does not claim

PoolFIX does not claim that HSG179, Building Regulations, BS EN 1993-1-4 or a National Annex automatically approves a product. Project-specific design and acceptance remain necessary.

Frequently asked questions

Is PoolFIX coated automatically suitable for every swimming-pool application?

No. It is the primary PoolFIX system commercially, but an automatic recommendation requires a validated product-specific application rule.

Can 1.4529 be used for a ceiling point within 1.0 metre of the water?

No. The prohibited overhead position takes precedence over distance.

What happens when application information is incomplete?

The automatic selector returns Technical review required and does not recommend a product.

1.4529 HCR application limits — PoolFIX technical application guidance

Selection route

  1. 1. Match a validated PoolFIX coated rule.
  2. 2. Consider restricted 1.4529 only after no coated match.
  3. 3. Return Technical review required when evidence is incomplete.
PoolFIX coated swimming-pool fixingsMaterial selection for swimming-pool fixings
Use the Material Advisor

Request quote?

Request a quote based on the documented product and application route. Technical review remains required when no validated automatic match exists.

Request quote
Supplied from the Netherlands
Availability shown per product
Delivery confirmed per order

Sitemap

HomePoolFIX coated fixingsPoolFIX coatedMaterial AdvisorStandards & GuidanceAboutBlogACRATON® DolphinContact
Pool FIX

Application-specific material selection, product documentation and batch traceability where applicable.

Contact

Rivierkade 9A

4931AA Geertruidenberg

The Netherlands

Tel: +31 162 69 57 58

info@poolfix.nl

© 2026 Pool FIX B.V. All rights reserved.

PoolFIX Safety & Liability Check

Safety requirements and liability legislation vary by country. This quick check provides technical risk guidance and does not replace a professional inspection or local legal advice.

IS YOUR SWIMMING POOL SAFE?

If an accident happened tomorrow, could you demonstrate that the correct fastening materials were used?

Public and commercial swimming pools can contain safety-critical fasteners exposed to an extremely aggressive environment.

Incorrect or unsuitable materials can create a serious safety risk.

Check your potential Safety & Liability Risk in approximately 60 seconds.

Safety requirements and liability legislation vary by country. This quick check provides technical risk guidance and does not replace a professional inspection or local legal advice.